paru

Interactively search for and install a package

$ paru [package_name_or_search_term]

$ paru

$ paru -Sua

$ paru -Si [package]

$ paru --getpkgbuild [package]

$ paru --getpkgbuild --print [package]

paru <operation> [options] [targets]

paru <search terms>

paru

Paru is an AUR helper written in Rust and based on the design of yay. It aims to be your standard pacman wrapping AUR helper with minimal interaction.

Paru is a tool to easily build and install packages from the AUR, along with their dependencies. Paru also expands many of pacman's options making them AUR aware.

This manpage only covers options unique to paru. For other options see pacman(8).

-P, --show

Printing related options.

-G, --getpkgbuild

Downloads PKGBUILDs from the ABS or AUR. The ABS can only be used for Arch Linux repositories.

-U, --upgrade

When ran without targets, like makepkg, builds a PKGBUILD in the currrent directory.

-L, --repoctl

List local repos.

-C, --chrootctl

Interactive shell to the chroot.

If no arguments are provided 'paru -Syu' will be performed.

-R, -S, -Si, -Sl, -Ss, -Su, -Sc, -Qu -T

These operations are extended to support both AUR and repo packages.

-R

Paru will also remove cached data about devel packages.

-R --local

Paru will also remove the package from the local repo.

-Sc

Paru will also clean cached AUR packages and any untracked files in the cache. Cleaning untracked files will wipe any downloaded sources or built packages but will keep already downloaded VCS sources.

-Sss

Paru will also output a verbose search result when passing two

-S, -Si, -Sl, -Ss, -Su, -Qu

Paru will also handle AUR packages for these operations.

-Ta

Will filter a list of packages to ones that appear in the AUR.

<NO OPTION>

Interactive search and install. Displays a list of packages matching the search terms and prompts the user on which packages to install.

--gendb

Generate the development package database. This tracks the latest commit for each development package, so when there is a new commit paru will know to update. This is done per package whenever a package is synced. This option should only be used when migrating to paru from another AUR helper.

This also causes paru to assume all current development packages are up to date. Updates will then be detected on the next commit.

-c, --clean

Remove unneeded dependencies.

Make and check dependencies are considered for foreign packages. Pass this twice to ignore these.

-c, --complete

Print a list of all AUR and repo packages. This allows shell completion and is not intended to be used directly by the user.

-w, --news

Print new news from the Arch Linux homepage. News is considered new if it is newer than the build date of all native packages. Pass this twice to show all available news.

-p, --print

Prints the PKGBUILD to the terminal instead of downloading it.

-c, --comments

Print the AUR comments from the PKGBUILD's AUR page.

-l, --list

List packages in local repos

-d, --delete

Remove a package from the local repo.

-q, --quiet

Show less information.

-i, --install

Install a package into the chroot.

-u, --upgrade

Upgrade the chroot.

-i, --install

Also install the package once built.

--repo

Assume all targets are from the repositories. Additionally, actions such as sysupgrade will only act on repository packages.

-a, --aur

Assume all targets are from the AUR. Additionally, actions such as sysupgrade will only act on AUR packages.

Note that dependency resolution will still include repository packages.

--aururl

Set an alternative AUR URL. This is mostly useful for users in China who wish to use https://aur.tuna.tsinghua.edu.cn/.

--clonedir <dir>

Directory used to download and run PKGBUILDs.

--makepkg <command>

The command to use for makepkg calls. This can be a command in PATH or an absolute path to the file.

--pacman <command>

The command to use for pacman calls. This can be a command in PATH or an absolute path to the file.

--git <command>

The command to use for git calls. This can be a command in PATH or an absolute path to the file.

--gitflags <flags>

Passes arguments to git. These flags get passed to every instance where git is called by paru. Arguments are split on whitespace before being passed to git. Multiple arguments may be passed by supplying a space separated list that is quoted by the shell.

--gpg <command>

The command to use for gpg calls. This can be a command in PATH or an absolute path to the file.

--gpgflags <flags>

Passes arguments to gpg. These flags get passed to every instance where gpg is called by paru. Arguments are split on whitespace before being passed to gpg. Multiple arguments may be passed by supplying a space separated list that is quoted by the shell.

--fm <command>

This enables fm review mode, where PKGBUILD review is done using the file manager specified by command.

--fmflags <flags>

Passes arguments to file manager. These flags get passed to every instance where file manager is called by paru. Arguments are split on whitespace before being passed to the file manager. Multiple arguments may be passed by supplying a space separated list that is quoted by the shell.

--asp <command>

The command to use for asp calls. This can be a command in PATH or an absolute path to the file.

--mflags <flags>

Passes arguments to makepkg. These flags get passed to every instance where makepkg is called by paru. Arguments are split on whitespace before being passed to makepkg. Multiple arguments may be passed by supplying a space separated list that is quoted by the shell.

--bat <command>

The command to use for bat calls. This can be a command in PATH or an absolute path to the file.

--batflags <flags>

Passes arguments to bat. These flags get passed to every instance where bat is called by paru. Arguments are split on whitespace before being passed to bat. Multiple arguments may be passed by supplying a space separated list that is quoted by the shell.

--sudo <command>

The command to use for sudo calls. This can be a command in PATH or an absolute path to the file. The --sudoloop option is not guaranteed to work with a custom sudo command.

--sudoflags <flags>

Passes arguments to sudo. These flags get passed to every instance where sudo is called by paru. Arguments are split on whitespace before being passed to sudo. Multiple arguments may be passed by supplying a space separated list that is quoted by the shell.

--completioninterval <days>

Time in days to refresh the completion cache. Setting this to 0 will cause the cache to be refreshed every time, while setting this to -1 will cause the cache to never be refreshed. Defaults to 7.

--sortby <votes|popularity|id|baseid|name|base|submitted|modified>

Sort AUR results by a specific field during search. Defaults to votes.

--searchby <name|name-desc|maintainer|depends|checkdepends|makedepends|optdepends>

Search for AUR packages by querying the specified field. Defaults to name-desc.

--skipreview

Skip the review process.

--review

Don't skip the review process.

--upgrademenu

Show a detailed list of updates in a similar format to pacman's VerbosePkgLists option. (See pacman.conf(5)). Upgrades can be skipped using numbers, number ranges, or repo names.

Warning: It is not recommended to skip updates from the repositories as this can lead to partial upgrades. This feature is intended to easily skip AUR updates on the fly that may be broken or have a long compile time. Ultimately it is up to the user what upgrades they skip.

--noupgrademenu Do not show the upgrade menu.

--removemake [yes|no|ask]

Remove makedepends after installing packages. If set to ask, a menu will appear during builds allowing an option to be chosen then. Defaults to yes when specified without an option.

--noremovemake

Don't remove makedepends after installing packages.

--topdown

Print search results from top to bottom. Repo packages will print first. This is the default.

--bottomup

Print search results from bottom to top. AUR packages will print first.

--nocheck

Don't resolve checkdepends or run the check function.

--installdebug

Also install debug packages when a package provides them.

--noinstalldebug

Don't install debug packages when a package provides them.

--devel

During sysupgrade also check AUR development packages for updates. Currently only Git packages are supported.

Devel checking is done using git ls-remote. The newest commit hash is compared against the hash at install time. This allows devel updates to be checked almost instantly and not require the original PKGBUILD to be downloaded.

The slower pacaur-like devel checks can be implemented manually by piping a list of packages into paru (see examples).

--nodevel

Do not check for development packages updates during sysupgrade.

--develsuffixes

Suffixes that paru will use to decide if a package is a devel package. Used when determining if a pkgver bump is used when the --needed option is set.

--cleanafter

Remove untracked files after installation.

Untracked files are removed with the exception of directories. This allows VCS packages to easily pull an update instead of having to reclone the entire repo.

--nocleanafter

Do not remove package sources after successful install.

--redownload [yes|no|all]

Always download PKGBUILDs of targets even when a copy is available in cache. If all is specified, then PKGBUILDs will be downloaded for all packages, not just targets. Defaults to yes when specified.

--noredownload

When downloading PKGBUILDs, if the PKGBUILD is found in cache and is equal or newer than the AUR's version use that instead of downloading a new one.

--provides

Look for matching providers when searching for AUR packages. When multiple providers are found a menu will appear prompting you to pick one. This increases dependency resolve time although this should not be noticeable.

--noprovides

Do not look for matching providers when searching for AUR packages. Paru will never show its provider menu but pacman will still show its provider menu for repo packages.

--pgpfetch

Prompt to import unknown PGP keys from the validpgpkeys field of each PKGBUILD.

--nopgpfetch

Do not prompt to import unknown PGP keys. This is likely to cause a build failure unless using options such as --skippgpcheck or a customized gpg config.

--newsonupgrade

Print new news during sysupgrade.

--useask

Use pacman's --ask flag to automatically confirm package conflicts. Paru lists conflicts ahead of time. It is possible that paru does not detect a conflict, causing a package to be removed without the user's confirmation. However, this is very unlikely.

--nouseask

Manually resolve package conflicts during the install. Packages which do not conflict will not need to be confined manually.

--combinedupgrade

During sysupgrade, paru will first perform a refresh, then show its combined menu of repo and AUR packages that will be upgraded. Then after reviewing the PKGBUILDs, the repo and AUR upgrade will start with no need for manual intervention.

If paru exits for any reason after the refresh without upgrading, it will be the user's responsibility to either resolve the reason paru exited or run a sysupgrade through pacman directly.

--nocombinedupgrade

During sysupgrade, pacman -Syu will be called, then the AUR upgrade will start. This means the upgrade menu and PKGBUILD review will be performed after the sysupgrade has finished.

--batchinstall

When building and installing AUR packages instead of installing each package after building, queue each package for install. Then once either all packages are built or a package in the build queue is needed as a dependency to build another package, install all the packages in the install queue.

--nobatchinstall

Always install AUR packages immediately after building them.

--rebuild [yes|no|all]

Always build target packages even when a copy is available in cache. If all is selected then all packages are rebuilt, not only targets. Defaults to no.

--norebuild

When building packages if the package is found in cache and is an equal version to the one wanted skip the package build and use the existing package.

--sudoloop [= args...]

Periodically call sudo in the background to prevent it from timing out during long builds.

Optionally args can be passed to choose how to loop the command. This may be useful for doas where looping is done differently.

--nosudoloop

Do not loop sudo calls in the background.

localrepo [= Repos...]

Use a local repo to build and upgrade AUR packages.

Paru will act on packages in the enabled repos instead of foreign packages. The repo must already be declared in pacman.conf but does not have to already exist on disk.

Optionally a list of repos to use can be passed. By default paru will consider all local repos, building new packages into the fist listed repo and upgrading the packages in other enabled repos.

--chroot [= /path/to/chroot]

Build packages in a chroot. This requires the LocalRepo option to be enabled. Optionally a directory may be passed to specify where to create the chroot.

--nochroot

Don't build packages in a chroot.

paru foo

Search and install from the repos and the AUR using interactive search and install.

paru -Syu

Update package list and upgrade all currently installed repo and AUR packages.

paru -Sua

Update all currently installed AUR packages.

paru -S foo

Installs package foo from the repos or the AUR.

paru -Ss foo

Searches for package foo on the repos or the AUR.

paru -Si foo

Gets information about package foo from the repos or the AUR.

paru -S foo --mflags "--skipchecksums --skippgpcheck"

Installs foo while skipping checksums and PGP checks.

pacman -Qmq | grep -Ee '-(cvs|svn|git|hg|bzr|darcs)$' | paru -Ta - | paru -S --needed -

pacaur-like devel check.

AURDEST

Can be set to configure the build directory.

Overridden by --clonedir.

PARU_CONF

Overrides where paru will look for its config file.

PARU_PAGER

The pager paru will use for file review. Has higher priority than PAGER but lower priority than paru.conf.

CONFIG DIRECTORY

The config directory is $XDG_CONFIG_HOME/paru/. If $XDG_CONFIG_HOME is unset, the config directory will fall back to $HOME/.config/paru.

paru.conf is used to store all of paru's config options. See paru.conf(5) for more about this file.

CACHE DIRECTORY

The cache directory is $XDG_CACHE_HOME/paru/. If $XDG_CACHE_HOME is unset, the cache directory will fall back to $HOME/.cache/paru.

packages.aur holds a list of of all AUR packages for shell completion. By default the completion files are refreshed every 7 days.

devel.json tracks VCS packages and the latest commit of each source. If any of these commits change the package will be upgraded during a devel update.

BUILD DIRECTORY

Unless otherwise set this should be the same as CACHE DIRECTORY. This directory is used to store downloaded AUR Packages as well as any source files and built packages from those packages.

PACMAN.CONF

Paru uses pacman's config file to set certain pacman options either through alpm.rs or paru itself. Options inherited include most libalpm options and pacman options.

Notably: Databases, Color and *Path/*Dir options are used.

Please report bugs to our GitHub page https://github.com/Morganamilo/paru.

Morgan <morganamilo@archlinux.org>

paru.conf(5), makepkg(8), makepkg.conf(5), PKGBUILD(5), pacman(8), pacman.conf(5) See the arch wiki at https://wiki.archlinux.org/index.php/Arch_User_Repository for more info on the AUR.